• Easy 1:1 mixing ratio by volume (By weight A : B = 110 :100)

• Heat Resistant up to 90ºc / 194ºF perfect for coasters, placemats - suitable for using in coaster molds for hot and cold drinks. Not suitable for naked flame because the heat from a flame is higher than 90ºc / 194ºF, Can be used with battery operated candles.

• Features extreme clarity for a pristine, water clear finish

• The most durable resin on the market so you can be confident your artwork will stand the test of time and cup after cup, with no marks or traces

• Advanced formulation to minimise bubbles when pouring (we recommend to also preheat part A (resin) in a warm water bath if your work area is cold

• ASTM Certified non-hazardous, non toxic and no VOCs 

• Suitable for coasters, trays, flooring, table tops, jewellery, flower preservation and more

• Highest UV resistance for non-yellowing and protection of your artwork. 

• Self levelling

• Working time 25 -30 minutes at 25ºc

• Touch dry in 16 - 20 hours at 25°C (Full cure in 1-2 Days. Curing time depends on the temperature of your environment and the size of your mold).

• Non flammable

• Low / Medium viscosity

• Odour Free

Perfect for use with our glitters, pigments, epoxy pigment pastes and dyes.

Please note it is your responsibility to read all health and safety instructions before using this product (information gathered from Apex Resin website).

Our resins have been formulated with the most up to date epoxy resin chemicals and technology and with safety in mind. Apex Resin is safe for home use. (When used as directed)

As with all Resins, it is important that you read the safety precautions associated with our product carefully before use and contact us if you have any questions.

• Always wear nitrile gloves

• Wear a respirator when sanding partially cured resin 

• Work in a well ventilated room

• Although a respirator is essential when sanding partially cured resin, we also recommend the use of one whenever working with resin for complete protection, especially when additives such as inks, paints, pigments have been added to resin

• Wear safety goggles

• Avoid skin contact, if contact occurs-wash with soap and water

• Allow the resin to fully cure before handling

• Avoid contact with clothes and furniture. If resin is poured on unwanted areas wipe immediately with a clean, dry cloth using acetone or similar solvent 

• Do not eat, drink or smoke while working

• In case of eye contamination wash with plenty of water for more than 15 minutes and seek medical advice immediately.

• If swallowed, seek medical advice immediately if you feel unwell

• If alcohol inks have been used, do not use a flame as alcohol is flammable

• Keep out of reach of children